logo MODELLISMO SANT'ALESSANDRO S.R.L.
  1. Home
  2. Products
  3. WOODEN ITEMS
  4. 3D wooden puzzle
  5. E12065
E12065

UGEARS

UGEARS - FORD ANGLIA VOLANTE HARRY POTTER – Wooden Harry Potter car to build – 70173 1:18 SCALE

NOT AVAILABLE

Ugears is pleased to present Harry Potter fans with a one-of-a-kind car model: the Ford Anglia Volante, a car with a mind of its own. The Anglia is a faithful reproduction of the Weasleys' enchanted Muggle car. Children will have fun flying it in the air or simulating a ride along the track in front of the Hogwarts Express. Who can forget the scene in Harry Potter and the Chamber of Secrets, when Harry and Ron return to Hogwarts in the Anglia, but lose control and crash into the Whomping Willow? After narrowly escaping, the young wizards and all their belongings are ejected from the car, shocked by the mistreatment they have suffered. The Ugears Ford Anglia is powered by a spring that transmits torque to the rear wheels, providing driving power. The car can travel 3-4 meters with a single operation of the ratchet mechanism located in the underbody. The spring drum is safely hidden under the model's seats, while the authentic rear license plate serves as the start/stop button. There is also a neutral gear that allows the car to roll freely. The front wheels rotate 25 degrees in either direction and can be turned using the steering wheel or by pressing the wheels themselves, allowing the car to travel in a straight line or go in circles (it's up to you to make the Anglia fly! ). The car moves on any flat surface, from carpet to slippery tiles, thanks to the elastic "tyres" that surround all the wheels. It is possible to open the doors, trunk and bonnet of the Ford Anglia Volante manually. The open bonnet reveals engine details, while the boot is large enough to accommodate Harry's suitcases with the laser-engraved Hogwarts crest. But this is where the real magic happens: thanks to a special mechanism connected to the spring-loaded shaft that runs through the passenger compartment, the Anglia has a secret "eject" function. When you press the front license plate, the trunk and side doors open, while the folding front seats and a lever in the trunk dramatically throw all passengers and contents of the vehicle. Put Harry's bags in the boot, press the front license plate and watch as they are unceremoniously ejected by the enraged Anglia! The Ford Anglia wooden model consists of 246 pieces, has a "medium" difficulty level and an estimated assembly time of 6 hours. To assemble, simply remove the pieces from the laser-cut boards and fit them together following the detailed, illustrated instructions. Instructions are available in 11 languages. No glue or special tools are needed: everything needed for assembly is included in the package. For optimal operation, be sure to use the supplied sandpaper and wax to smooth and lubricate the moving parts. This fun magical Muggle car will appeal to all wizards, witches and Muggles, especially those who enjoyed the film "Harry Potter and the Chamber of Secrets", in which the car plays an important role. Anyone who loves model cars, loves to build with their own hands or appreciates unique and educational toys will love this exceptional DIY wooden model. The Ford Anglia Volante is a great gift idea for children who love the Harry Potter film series or for parents looking for a fun craft project to build with their children. Enjoy the hours spent together building this fascinating model, the fun and laughter during play, as your children eject the passengers and luggage over and over again, recreating the famous scene.

Still no reviews here!

No attachments available!

Related products

UGEARS – HARRY POTTER THE KNIGHT BUS – WOODEN MODEL TO BUILD 70172 1:43 SCALE

UGEARS

UGEARS – HARRY POTTER THE KNIGHT BUS – WOODEN MODEL TO BUILD 70172 1:43 SCALE

NOT AVAILABLE

The Knight Bus from the Harry Potter series is here to save young wizards, witches and Muggles. This DIY wooden mechanical bus model is an exciting addition to the Ugears Harry Potter collection and an ingenious work of engineering. To create this triple-decker bus with its unique features from the wizarding universe, our Ugears designers and engineers set themselves an ambitious goal: to create a bus that can shrink, expand and vary its speed, just like in the movie Harry Potter and the Prisoner of Azkaban. The lightning-fast Knight Bus can speed through the streets of Muggle London (or your living room) thanks to its powerful spring-driven engine, which is recharged with a secret key kept on the roof of the bus. Lift the magic button of the manipulator, also on the roof of the bus, to lock the transmission gears and prevent the bus from running away before all the wizards and witches have climbed on board. Once the bus is stopped, you can remove the secret winding key, insert it into the ratchet mechanism on the side of the bus, and give it a few turns. To start the bus, press the button on the magic manipulator while holding the bus, then let go! The Knight Bus will start moving thanks to a system of gears that transfer energy from the spring to the wheels, including a "flip" gear that allows the bus to continue its journey. The Knight Bus's main feature is its ability to transform, narrowing or widening its width with a simple twist of the magic manipulator. Turning the knob on the top of the bus counterclockwise will make the bus narrow, allowing it to squeeze through traffic. Turning the knob clockwise will make the bus (and any passengers) expand to its actual size. But here's the amazing thing: as the width of the bus changes, so does its speed! In its normal (uncompressed) state, the bus travels surprisingly fast. If the bus compresses, an internal mechanism slows it down. You can leave the Knight Bus in its charming natural wooden state, paint it purple (as in Harry Potter and the Prisoner of Azkaban), or make it in any color combination with your own paints or wood stains. The DIY model bus, inspired by the magical universe created by JK Rowling, is of "medium" difficulty, has 268 pieces and an estimated assembly time of 6 hours. To assemble it, simply detach the pieces from the pre-cut laser boards and fit them together. No glue or special tools are needed. Don't forget to sand and wax the moving parts to make your Knight Bus smoothly (sandpaper and wax are included in the kit). The detailed, illustrated instructions are available in 11 languages. The amazing collection of 3D mechanical puzzles, DIY model kits, automatons, robots, wooden puzzle boxes and STEM Lab model kits from Ugears is appreciated by all ages and skill levels in model making, from beginners to experienced hobbyists. The Knight Bus is especially suitable for Harry Potter fans, model making hobbyists, fans of Ugears' amazing automotive collection of vintage cars, racing cars, trucks and buggies (and now a bus!) and for everyone who loves to build fantastic things. The Knight Bus model kit is a great gift idea for parents of children who love the Harry Potter movie series, or for parents looking for a fun craft project to build with their children. Are your kids bored on a rainy afternoon? The Knight Bus will come to your rescue! We do not ship to the Canary Islands
UGEARS – HARRY POTTERS WOODEN TRAIN - HOGAWARST EXPRESS 70176 1:45 SCALE

UGEARS

UGEARS – HARRY POTTERS WOODEN TRAIN - HOGAWARST EXPRESS 70176 1:45 SCALE

NOT AVAILABLE

Enter the wizarding world and join Harry, Hermione and Ron on an exciting journey aboard the Hogwarts Express with this special working model train from Ugears. Load up the model, press the Start/Stop switch in the smokestack, and watch the locomotive's gears, wheels and connecting rods move mesmerizingly as it moves forward. The Ugears Hogwarts Express can travel 4 meters (with tender and carriage) or 6 meters (locomotive only) on any smooth, flat surface. The beautiful locomotive can be operated alone or coupled with two carriages: a coal tender and a passenger carriage. The tender has an empty coal compartment in which you can store the train winding key or other small items. The locomotive is the driving force of the model, with its metal spring engine and gears transmitting power to the moving wheels. The locomotive is wound using a special key (there are winding slots on both the left and right sides of the engine), but first be sure to turn the chimney to the "Stop" position. Once the spring is wound, hold the model by rotating the chimney to the "Start" position, then release and watch the train move away in a straight line. See those beautiful train engine wheels and coupling rods in action! The model is rated "Advanced" difficulty level with an estimated assembly time of 7 hours. The locomotive can be assembled in about 3 hours, giving you a head start on imaginative play! This DIY wooden model kit consists of 504 parts laser pre-cut into wooden boards. To assemble, simply remove the pieces from the boards and snap them together following the detailed, illustrated instructions available in 11 languages. One of the great things about our models is that no glue or special tools are needed - everything needed for assembly is included in the package.