D33421

REVELL

REVELL JUNKERS JU 87 G/D TANK BUSTER - 04692 SCALA 1:72

The Junkers Ju-87 Stuka (short for German Sturzkampfflugzeug, meaning dive bomber) is a German single-engine dive bomber with a classic tail, wings in an inverted gull-wing configuration, and all-metal construction. The Ju-87 is one of the most famous Luftwaffe aircraft, a symbol of its power alongside the Me-109. At the beginning of the war (1939-1941) it became a symbol of the Blitzkrieg, often causing panic among enemy soldiers by installing acoustic sirens (so-called jerychońskie trunks), which caused a specific sound during a dive flight. The creator of the machine was Hermann Pohlmann, and the Ju-87 first flew into the air in 1935, and went into production two years later. During the civil war in Spain, without encountering any serious enemy in the air, it was able to prove itself effective in the missions for which it was created. Due to the possibility of very steep dives, while maintaining a relatively low speed, it achieved a very high bombardment efficiency. Stuka's fame was confirmed during its activities in Poland, the Netherlands, France, Greece and Crete. However, during the Battle of Britain, slow Stukas with permanently mounted landing gear were simply massacred by RAF aircraft and, as a result, were delegated to attack less defended targets. On the Eastern Front, the Ju-87 served a role primarily as a close support aircraft and an excellent tank destroyer. Hans Ulrich Rudel - the Luftwaffe pilot, honored with the most awards, had destroyed 519 Soviet tanks on his behalf. During the war the production of the Ju-87 was suspended several times, but it always turned out that it had to be restarted because there were no other aircraft that could worthily replace it. During the war, a dozen versions and versions of the Ju-87 were created. The first mass-produced was the Ju-87 B (Berta). It was powered by two versions of the Jumo 211 engine with 1000 KM or 1200 KM. It served as a land-based dive bomber. In turn, the Ju-87R (Richard) was launched into attacks against naval targets. It had a longer range than the B version, but was a little slower. Version D (Dora) was the most widely produced and modified. They had new versions of the Jumo 211 engine with 1420 and 1500 hp. The Ju-87D featured better armor than its predecessors. The last large-scale version of the Ju 87 was the Model G (Gustav), an attack aircraft and "destroyer", which entered the line units in early 1943. The main weapons of this version were the two Bordkanone guns 37mm BK 3.7 mounted in trays under the wings. The Ju-87G also had improved armour. During the entire war, approximately 5,900 units of all versions of the Ju-87 were produced. Technical data (Ju-87B version): length: 11 m, wingspan: 13.8 m, height: 4.23 m, maximum speed: 390 km/h, maximum range: 500 km, maximum ceiling 8200 m, armament: fixed - 3 7.92 mm cal machine guns, suspended - up to 450 kg of bombs.

Still no reviews here!

No attachments available!


Related products

REVELL B-25 MITCHELL - EASY CLICK SYSTEM - 03650 - SCALA 1:72

REVELL

REVELL B-25 MITCHELL - EASY CLICK SYSTEM - 03650 - SCALA 1:72

The North American B-25 Mitchell is an American medium bomber from World War II. The B-25 is an all-metal high-wing airframe with three-point retractable landing gear and a twin-tail. Propulsion consisted of two Wright Cyclon engines with power from 1300 KM to 1850 KM, depending on the version. The flight of the prototype took place in 1940, and mass production began a year later. Numerous versions of this bomber were produced during the war, including the B-25G (with a 75 mm cannon in the bow of the hull), the B-25H (with a 75 mm cannon and 6 machine guns in the bow of the machine) and the B -25J (with 8 x 12.7 mm machine guns in the bow of the fuselage). B-25 aircraft fought primarily in the Pacific and Mediterranean basin. Some of them were handed over to Britain and the USSR under the Lend-Lease Agreement, where they made their combat debut at Stalingrad. The Polish 305 Squadron flew the B-25 since 1943. The B-25 was most famous for its bold and courageous bomb attack on Tokyo in April 1942 (the famous Doolittle raid). Technical data: Maximum speed: 442 km/h, rate of climb: 4 m/s, maximum ceiling 7,600 m, maximum range: 4,300 km, armament: permanent - depending on the version, from 4 to 12 12.7 Browning machine guns mm or combination of the 75 mm and km guns. suspended - up to 2700 kg of bombs.
REVELL SPITFIRE MK. VB SUPERMARINE - 03897 SCALA 1:72

REVELL

REVELL SPITFIRE MK. VB SUPERMARINE - 03897 SCALA 1:72

The Supermarine Spitfire is probably the most famous British fighter of the Second World War. It was an all-metal machine with a low-wing configuration, characteristic elliptical wings, a classic tail and retractable landing gear. The prototype flight took place on 5 March 1936. The Spitfire proved to be the RAF's wartime staple, which continued to perform well after the war, remaining in production for 10 years. The Spitfire's story began on the drawing board of RJ Mitchell, Supermarine's chief designer. The first machines went to RAF units in 1938, but when the Battle of Britain began in the summer of 1940, there were already 19 squadrons of modern fighters at the airfields - together with the slightly older Hurricanes of the Islands, 600 aircraft were standing defending. As hostilities expanded, the Spitfire saw service wherever the RAF operated in the Far East, North Africa and Italy, during the Normandy landings and fighting in France, and finally during the operation in Germany in 1945. For many Britons, it became a symbol of victory in World War II. This wonderful machine has at least a dozen production versions. The most important are, among others, the first series-produced Spitfire Mk.I powered by a 1030 hp Rolls-Royce Merlin II engine. It was this machine above all that made such an excellent contribution to the Battle of Britain. Many versions of this model were developed, including PR Mk IA (reconnaissance version) or PR.IG (armed reconnaissance version). Another interesting version was the Spitfire Mk.V with a 1440 hp Rolls-Royce Merlin 45 engine. Merlin 50 engines were also assembled later. Serial production of this version began in 1941 and was the RAF's response to the appearance of the Messerschmitt Bf-109F. Another very successful version is the Spitfire Mk.IX, powered by a Merlin 61 engine with a 4-bladed propeller. It was created as an opponent of the Focke-Wulf Fw-190 and was put into production at the end of 1941. This version was modified several times and, for example, in 1944 it got a new gyroscopic sight, an enlarged rudder or a different wing system. Another major version is the Spitfire Mk.XIV with a Rolls-Royce Griffon 61 engine and a five-bladed propeller. Serial production began in October 1943. One of the last series produced was the Mk.21 version. This version had a Griffon 61 engine, a heavily reinforced structure and sheath, the wings were lengthened, increasing their flight surface. Mass production began in March 1945. Technical data (Mk.XIV version): length: 9.14 m, wingspan: 11.23 m, height: 3.05 m, maximum speed: 717 km/h, speed of climb: 18.5 m/s, practical ceiling: 13,200 m, maximum range: 1815 km, armament: fixed - 4 x 7.7 mm machine guns and 2 x 20 mm Hispano Mk II cannons, suspended - up to 225 kg of bombs .
Revell 04166 Messerschmitt Me 262 A1a Scala 1/72

REVELL

Revell 04166 Messerschmitt Me 262 A1a Scala 1/72

Revell 04166 Messerschmitt Me 262 A1a Scale 1/72. Plastic kit to assemble and colour, does not contain glue or colours. The Messerschmitt Me-262A Schwalbe (German: swallow) is a German twin-engine fighter-bomber with a metal structure in a low-wing configuration. The Me-262 was the first fighter jet in the history of aviation. The first flight with piston engines took place in 1941 and with turbojet engines on 18 July 1942. The first airframe design, designated P.1065, was presented in 1939 and, surprisingly, differed significantly from the final version. It was quickly decided to use oblique wings and test the airframe in flight with piston engines (Jumo210), which was successfully completed in 1941. Due to problems with the target power unit (BMW003 engine), the first jet flight on the Me-262 took place with Junkers Jumo004 engines. Interestingly, the Me-262 was structurally ready for serial production at the end of 1942. However, its entry into the line was significantly delayed. First, due to material shortages (especially shortages of tungsten and chromium), which forced technological changes, secondly, due to the failure of the BMW003 engines, and thirdly, due to Hitler's resistance to fact that the Me-262 was a fast bomber, not a fighter. As a result of all factors, the aircraft went online only in 1944! Given the already overwhelming Allied advantage in the air, the Me-262's shortage of fuel and trained crews could not have had a major impact on the course of the war. Undoubtedly, it was technologically superior to enemy aircraft, and the loss ratio was 1:9 in favor of the Me-262. A total of around 1,400 machines were built, but only around 300 entered service. Several development versions of this revolutionary aircraft were created: a bomber (A-2a), a reconnaissance fighter (A-1a / U3 and A-4a), a day fighter (A-1a) and a night fighter (B -1a / U1). Technical data (Me-262A-1a version): length: 10.6 m, wingspan: 12.6 m, height: 3.5 m, maximum speed: 900 km/h, rate of climb: 20 m/s, maximum range: 1050 km, maximum ceiling 11450 m, armament: fixed - 4 30 mm MK108 guns, underslung - 24 R4M rockets, 55 mm caliber, up to 1000 kg of bombs.
ZVEZDA RUSSIAN MULTIROLE FIGHTER MIG 1.44 – 7252 SCALA 1:72

ZVEZDA

ZVEZDA RUSSIAN MULTIROLE FIGHTER MIG 1.44 – 7252 SCALA 1:72

1/72 scale is ideal for model aircraft, military models and figures. This means that the model is 72 times smaller than the real object. For example, a 1/72 scale model airplane will measure 20cm in length if the real thing measures 14.4m (1440cm). The 1/72 scale figures measure approximately 2.5cm tall. Product type: Model airplanes To build a plastic model airplane, you will need some materials: - a cutter or cutting pliers - some modeling glue. You can also decide to paint it with brushes and model paints (acrylic or enamel paints, your choice). The model consists of several pieces to cut and assemble. Depending on the number of pieces, the time needed for construction will be more or less long. An instruction manual is included in the package.