We all want our locomotives to be as realistic as possible. That's why we have the LokPilot 5DCC packed with functional outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with an output current of 250 mA each. In the versions with PluX22 or 21MTC interface there are 4 outputs to control servos or additional logic level outputs. Important lighting functions are available. The brightness of each output can be set separately. The decoder manages automatic thrust and traction when uncoupling for ROCO®, Krois® and Telex® couplings. The LokPilot 5 DCC is a "pure-bred" DCC decoder. The speeds from 14 to 128 are as natural as the 2- and 4-digit addresses. Up to 32 functions can be activated. Thanks to RailComPlus® the decoders automatically register with a suitable DCC system such as ESU CabControl. The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom-equipped DCC systems. For control stations that only program CVs from 1-255 there are auxiliary CV registers. The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACKCom commands or the Lenz® ABC system. It is also possible to brake with DCC brake modules or with DC voltage. It also stops with a Selectrix® brake diode. An automatic ABC shuttle enables automatic commuting between two train stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder automatically switches between the operating modes "on the fly". The motor control of the LokPilot 5 DCC has again been substantially improved. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures extremely quiet operation, especially with bell-type motors. Operation: The typical "buzzing" is a thing of the past. The load control now has up to 10 HP that can be adjusted for difficult cases. The unique "Autotune" function allows automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5 A of motor current. Enough juice even for older motors. Of course, all function outputs and the motor output are protected against overload.

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all features, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analogue AC systems. This lack of flexibility comes at a more affordable price. LokPilot 5 decoders are offered with all common interfaces. The LokPilot 5 DCC is a "pure" DCC decoder. The speed steps from 14 to 128 are as natural as the 2- and 4-digit addresses. Up to 32 functions can be activated. Thanks to RailComPlus® the decoders automatically register with a suitable DCC system such as the ESU CabControl. The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read out on the main track with DCC systems equipped with RailCom. For control stations that only program CVs from 1-255 there are auxiliary CV registers. The LokPilot 5 DCC decoder recognizes Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An automatic ABC shuttle train enables automatic commuting between two train stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on the fly".

Sapphire Decoder 21 pin supports 1 Amp DC with 1.5 Amp stall. Low speed "gearbox" for shunting operations. "Water" and "Fuel" amount settings can be stored in the Sapphire which provides real time fuel consumption. Burn rates are selectable. High frequency back-emf motor control. Operation on DC layout. Provides 1A DC motor current and 1.5A stall. Function outputs rated at 200mA each. Total sum current of the function outputs is 500mA. Directional or independent lighting featuring dimming and extensive special effects. Advanced behavior control and extensive addressing. Support for all forms of programming as described in NMRA RP-9.2.3.

DIGITAL PLUS LOKDECODER LENS SILVER +22PLUXCOD 10322-0

ESU LOKPILOT 5 DCC 6-PIN NEM651 COD 59626

Uhlenbrock 76900 DCC decoder for H0 functions. DCC decoder for functions Dimensions: 22 x 12.5 x 2.5mm / 1.2A

ESU 51822 SwitchPilot servo V2.0 for 4 servomotors in Dc and DCC. SwitchPilot servo V2.0 decoder multiprotocol DCC / Motorola - Railcom both digital and analog operation controls 4 servomotors for switching, accessories, level crossings, gates, water columns... (4 outputs for 4 servomotors) integrated feedback module can be programmed digitally from the control unit or analogically using its own function keys: both the position of the servomotor and the speed of movement can be adjusted very easily.

Esu Electronic 51801 SwitchPilot Extension. Extension module for SwitchPilot If required, the SwitchPilot can be expanded with the SwitchPilot extension module: connected to the side of the SwitchPilot, it offers four relay outputs, which are used to switch potential-free loads or to polarize turnouts; the ideal supplement for complicated circuits. Operating mode The SwitchPilot extension module only works in combination with a SwitchPilot. Connected to the side, it receives its power supply directly from the SwitchPilot. It contains a total of 4 twin relays (2 x DPDT), each of which is dedicated to a pair of transistorized SwitchPilot outputs. The switch position of the respective relay depends directly on the state of this output pair. With the help of the relay, it is possible to switch loads, galvanically separate them from the rest of the track (works like a k84), or polarize a motorized turnout. With the continuous rating of 1.5 Amp of the relay, it is possible to polarize switches, or block powered signals based on the signal, or motorized devices, such as (water) pumps can be switched. Particularly complicated is the option to control motorized switches: of course the SwitchPilot extension module also easily handles the necessary motor polarization.

Roco 61196 geoLINE turnout decoder. geoLINE turnout decoder Complete drive for item 61195 geoLINE turnout motor. The decoder can be activated via turnout addresses 1 to 1024. The decoder properties can be changed using CV values. ■ Simple assembly ■ Easy to use ■ Short circuit and overheating protection Note: The decoder can no longer be activated via locomotive addresses!

TRIX 66839 Decoder 1600 mA for 21-pin interface. Receiver for all Trix H0 DC locomotives with a 21-pin interface and a current consumption of up to 1600 mA (motor 1100 mA, functions 150 mA each). The electronics have a total of 4 switchable functions. The “function” output is intended for lighting. Additional functions can be switched via a mobile station or a DCC control center. • Universally usable in Setrix and DCC formats. • Automatic system and analog recognition. • Same locomotive address in Setrix and DCC operation. • 7 adjustable maximum speeds. • 4 adjustable motor pulse variants. • Automatic load balancing. • Connection for the light function. • Connection for additional functions. • Short-circuit protection of the motor output. • Overload protection of the light output. • Overload protection of the additional function. • Programming of additional settings by selecting the address “00”, e.g. fine gradation of the pulse widths (control variant), polarity reversal in Selectrix operation: • 31 speed levels. • 111 addresses. • Block path operation with simple diodes (1 or 2 holding sections). • Braking operation with braking diode. in DCC operation: • manual speed level selection 14 / 28 levels. • automatic switching to 128 speed levels. • Selectable 7 or 14-bit addresses. • Braking operation with braking generators in DC and broadcast mode